{"id":1465,"date":"2026-06-10T19:04:24","date_gmt":"2026-06-10T19:04:24","guid":{"rendered":"https:\/\/www.buildtomade.com\/blog\/?p=1465"},"modified":"2026-06-10T19:05:35","modified_gmt":"2026-06-10T19:05:35","slug":"beagle-dog-cord-holder","status":"publish","type":"post","link":"https:\/\/www.buildtomade.com\/blog\/beagle-dog-cord-holder\/","title":{"rendered":"Beagle Dog Cord Holder"},"content":{"rendered":"\n

This handmade beagle-shaped cord holder is a fun Father\u2019s Day gift that keeps charging cables from slipping behind a table or desk. Designed to hold up to three cords, it combines a practical solution with a personalized touch inspired by our family\u2019s dog.<\/p>\n\n\n\n

Materials<\/h2>\n\n\n\n

\u2013 1\/2\u2033 poplar board (3-1\/2\u2033 x 24\u2033)
\u2013 Wood glue<\/a>
\u2013 Printed dog template (below)
\u2013 Antique oak stain
\u2013 Polyurethane finish<\/p>\n\n\n\n

Tools<\/h2>\n\n\n\n

\u2013 Jigsaw<\/a>
\u2013 Drill<\/a>
\u2013 1\/4\u2033 drill bit
\u2013 Sandpaper<\/a> (80-grit and 120-grit)
\u2013 Glue stick
\u2013 Screwdriver (for sanding cord slots)
\u2013 Clamps (recommended)<\/p>\n\n\n\n

Steps<\/h2>\n\n\n\n
    \n
  1. Cut two 6\u2033 lengths from the 1\/2\u2033 x 3-1\/2\u2033 poplar board.<\/li>\n\n\n\n
  2. Apply wood glue and sandwich the two pieces together to create a thicker blank. Clamp and allow the glue to dry completely.<\/li>\n\n\n\n
  3. Attach the dog template to the wood blank using a glue stick. The printable template is available below. You can resize it to your needs.<\/li>\n\n\n\n
  4. Use a jigsaw to cut out the silhouette. Work slowly and remove small sections at a time, especially around tighter curves and details (it won\u2019t be perfect).<\/li>\n\n\n\n
  5. Mark the locations for the cord slots and drill three holes using a 1\/4\u2033 drill bit.<\/li>\n\n\n\n
  6. Use the jigsaw to cut from the top edge down to each drilled hole, creating three cord-retaining slots.<\/li>\n\n\n\n
  7. Sand the entire piece with 80-grit sandpaper to remove saw marks and smooth uneven areas. Follow with 120-grit sandpaper to refine the shape and smooth all edges and curves.<\/li>\n\n\n\n
  8. Wrap sandpaper around a screwdriver and use it to smooth the inside edges of the cord slots.<\/li>\n\n\n\n
  9. Apply stain of your choice and allow it to dry according to the manufacturer\u2019s instructions.<\/li>\n\n\n\n
  10. Finish with polyurethane for added durability and protection.<\/li>\n\n\n\n
  11. Place the holder on a nightstand, side table, or work desk and snap charging cables into the slots.<\/li>\n<\/ol>\n\n\n\n

    Notes<\/h2>\n\n\n\n